Case Study

OT Systems Ethernet-Over-Coax Solution takes the HKIA CCTV System from Analog to IP

The Hong Kong International Airport recently modernized its CCTV system taking its surveillance capabilities from analogue to IP by integrating OT Systems’ Ethernet-over-Coax (EoC) transmission solution to existing infrastructure.

A total of 100 single-channel ET1100CPp-T transmitters were installed to connect 100 IP cameras and connected to either single-channel ET1100CPp-R receivers or 8 to 16-channel ET4200CPp-RS8/16 rackmount receivers. The ET4200CPp-RS8/ 16 receiver offers full switching capability and 10/ 100/ 1000Mbps auto-MDI/ MDIX full-duplex communication and it is available with rack-mounting installation in a 19-inch rack cabinet.

The EoC solution provides flexible communications and 30-watt high power, with power over coax (PoC) technology to remote PoE IP cameras or PTZ cameras. The power supply can be connected with one-channel or multi-channel receivers like the ET1100CPp-R and ET42000CPp-RS8/16, which supply power using legacy cable.

A full line of EtherXtra™ Ethernet-over-Coax products provides an alternative for system integrators and service providers looking for a solution to utilizing existing coax infrastructure and migrating to IP-based systems. Taking advantage of the existing coaxial cables, installers can provide quick installation and high performance for CCTV upgrading without rewiring their environment. Also, the EoC solution provides flexible communications and a 30-watt high power source with power-over-coax (PoC) technology to remote PoE IP cameras or PTZ cameras. This EoC retrofit easily repurposes existing coaxial cable infrastructure, enhancing the system with centralized power and creates feature-rich IP surveillance systems.



 

To top